xmpp.chapril.org-conversejs/docs/source/setup.rst
2017-04-04 20:43:25 +00:00

283 lines
11 KiB
ReStructuredText

.. raw:: html
<div id="banner"><a href="https://github.com/jcbrand/converse.js/blob/master/docs/source/setup.rst">Edit me on GitHub</a></div>
=====================
Setup and integration
=====================
.. contents:: Table of Contents
:depth: 2
:local:
.. _what-you-will-need:
------------------
What you will need
------------------
If you'd like to host your own version of converse.js or you would like to
integrate it into your website, then you'll need to set up and configure some
more server components.
For example, if you want to allow chat accounts under your own domain (for
example, the same domain as your website), then you will need to set up your
own :ref:`XMPP server`.
Besides an XMPP server, you also need a way for converse.js (which uses HTTP), to
communicate with XMPP servers (which use XMPP).
For this, you'll need :ref:`BOSH Connection Manager`.
Lastly, if you want to maintain a single chat session for your website's users,
you'll need to set up a BOSH session on your server, which converse.js can then
connect to once the page loads. Please see the section: :ref:`session-support`.
.. _`XMPP server`:
An XMPP server
==============
*Converse.js* implements `XMPP <http://xmpp.org/about-xmpp/>`_ as its
messaging protocol, and therefore needs to connect to an XMPP/Jabber
server (Jabber is really just a synonym for XMPP).
You can connect to public XMPP servers like ``jabber.org`` but if you want to
have :ref:`session support <session-support>` you'll have to set up your own XMPP server.
You can find a list of public XMPP servers/providers on `xmpp.net <http://xmpp.net>`_ and a list of
servers that you can set up yourself on `xmpp.org <http://xmpp.org/xmpp-software/servers/>`_.
.. _`BOSH connection manager`:
A BOSH Connection Manager
=========================
Your website and *Converse.js* use `HTTP <https://en.wikipedia.org/wiki/Hypertext_Transfer_Protocol>`_
as protocol to communicate with the webserver. HTTP connections are stateless and usually shortlived.
XMPP on the other hand, is the protocol that enables instant messaging, and
its connections are stateful and usually longer.
To enable a web application like *Converse.js* to communicate with an XMPP
server, we need a proxy which acts as a bridge between these two protocols.
This is the job of a BOSH connection manager. BOSH (Bidirectional-streams Over
Synchronous HTTP) is a protocol for allowing XMPP communication over HTTP. The
protocol is defined in `XEP-0206: XMPP Over BOSH <http://xmpp.org/extensions/xep-0206.html>`_.
Popular XMPP servers such as `Ejabberd <http://www.ejabberd.im>`_,
prosody `(mod_bosh) <http://prosody.im/doc/setting_up_bosh>`_ and
`OpenFire <http://www.igniterealtime.org/projects/openfire/>`_ all include
their own connection managers (but you usually have to enable them in the
configuration).
However, if you intend to support multiple different servers (like
https://conversejs.org does), then you'll need a standalone connection manager.
For a standalone manager, see for example `Punjab <https://github.com/twonds/punjab>`_
and `node-xmpp-bosh <https://github.com/dhruvbird/node-xmpp-bosh>`_.
The demo on the `Converse.js homepage <http://conversejs.org>`_ uses a connection
manager located at https://conversejs.org/http-bind.
This connection manager is available for testing purposes only, please don't
use it in production.
Alternatively, Websocket support
================================
Websockets provide an alternative means of connection to an XMPP server from
your browser.
Websockets provide long-lived, bidirectional connections which do not rely on
HTTP. Therefore BOSH, which operates over HTTP, doesn't apply to websockets.
`Prosody <http://prosody.im>`_ (from version 0.10) supports websocket connections, as
does the node-xmpp-bosh connection manager.
--------------------------------------------
Overcoming cross-domain request restrictions
--------------------------------------------
Lets say your domain is *example.org*, but the domain of your connection
manager is *example.com*.
HTTP requests are made by *Converse.js* to the connection manager via XmlHttpRequests (XHR).
Until recently, it was not possible to make such requests to a different domain
than the one currently being served (to prevent XSS attacks).
Luckily there is now a standard called
`CORS <https://en.wikipedia.org/wiki/Cross-origin_resource_sharing>`_
(Cross-origin resource sharing), which enables exactly that.
Modern browsers support CORS, but there are problems with Internet Explorer < 10.
IE 8 and 9 partially support CORS via a proprietary implementation called
XDomainRequest. There is a `Strophe.js plugin <https://gist.github.com/1095825/6b4517276f26b66b01fa97b0a78c01275fdc6ff2>`_
which you can use to enable support for XDomainRequest when it is present.
In IE < 8, there is no support for CORS.
Instead of using CORS, you can add a reverse proxy in
Apache/Nginx which serves the connection manager under the same domain as your
website. This will remove the need for any cross-domain XHR support.
For example:
============
Assuming your site is accessible on port ``80`` for the domain ``mysite.com``
and your connection manager manager is running at ``someothersite.com/http-bind``.
The *bosh_service_url* value you want to give Converse.js to overcome
the cross-domain restriction is ``mysite.com/http-bind`` and not
``someothersite.com/http-bind``.
Your ``nginx`` or ``apache`` configuration will look as follows:
Nginx
-----
.. code-block:: nginx
http {
server {
listen 80
server_name mysite.com;
location ~ ^/http-bind/ {
proxy_pass http://someothersite.com;
}
}
}
Apache
------
.. code-block:: apache
<VirtualHost *:80>
ServerName mysite.com
RewriteEngine On
RewriteRule ^/http-bind(.*) http://someothersite.com/http-bind$1 [P,L]
</VirtualHost>
.. _`session-support`:
----------------------
Single Session Support
----------------------
It's possible to enable shared sessions whereby users already
logged in to your website will also automatically be logged in on the XMPP server,
Once a user is logged in, the session will be kept alive across page loads by
way of the :ref:`keepalive` setting.
There are a few ways to let your users be automatically authenticated to an
XMPP server once they've logged in to your site.
Option 1). Server-side authentication via BOSH prebinding
=========================================================
To **prebind** refers to a technique whereby your web application sets up an
authenticated BOSH session with the XMPP server or a standalone `BOSH <http://xmpp.org/about-xmpp/technology-overview/bosh/>`_
connection manager.
Once authenticated, it receives RID and SID tokens which need to be passed
on to converse.js upon pa. Converse.js will then attach to that same session using
those tokens.
It's called "prebind" because you bind to the BOSH session beforehand, and then
later in the page you just attach to that session again.
The RID and SID tokens can be passed in manually when calling
`converse.initialize`, but a more convenient way is to pass converse.js a :ref:`prebind_url`
which it will call when it needs the tokens. This way it will be able to
automatically reconnect whenever the connection drops, by simply calling that
URL again to fetch new tokens.
Prebinding reduces network traffic and also speeds up the startup time for
converse.js. Additionally, because prebind works with tokens, it's not necessary
for the XMPP client to know or store users' passwords.
One potential drawback of using prebind is that in order to establish the
authenticated BOSH session server-side, you'll need to access and pass on the XMPP
credentials server-side, which, unless you're using tokens, means that you'll
need to store XMPP passwords in cleartext.
This is however not the case if you for example use LDAP or Active Directory as
your authentication backend, since you could then configure your XMPP server to
use that as well.
To prebind you will require a BOSH-enabled XMPP server for converse.js to connect to
(see the :ref:`bosh-service-url` under :ref:`configuration-variables`)
as well as a BOSH client in your web application (written for example in
Python, Ruby or PHP) that will set up an authenticated BOSH session, which
converse.js can then attach to.
.. note::
A BOSH server acts as a bridge between HTTP, the protocol of the web, and
XMPP, the instant messaging protocol.
Converse.js can only communicate via HTTP (or websocket, in which case BOSH can't be used).
It cannot open TCP sockets to communicate to an XMPP server directly.
So the BOSH server acts as a middle man, translating our HTTP requests into XMPP stanzas and vice versa.
Jack Moffitt has a great `blogpost <http://metajack.im/2008/10/03/getting-attached-to-strophe>`_
about this and even provides an
`example Django application <https://github.com/metajack/strophejs/tree/master/examples/attach>`_
to demonstrate it.
When you authenticate to the XMPP server on your backend application (for
example via a BOSH client in Django), you'll receive two tokens, RID (request ID) and SID (session ID).
The **Session ID (SID)** is a unique identifier for the current *session*. This
number stays constant for the entire session.
The **Request ID (RID)** is a unique identifier for the current *request* (i.e.
page load). Each page load is a new request which requires a new unique RID.
The best way to achieve this is to simply increment the RID with each page
load.
You'll need to configure converse.js with the ``prebind``, :ref:`keepalive` and
:ref:`prebind_url` settings.
Please read the documentation on those settings for a fuller picture of what
needs to be done.
Example code for server-side prebinding
---------------------------------------
* PHP:
See `xmpp-prebind-php <https://github.com/candy-chat/xmpp-prebind-php>`_ by
Michael Weibel and the folks from Candy chat.
* Python:
See this `example Django application`_ by Jack Moffitt.
Option 2). Delegated authentication, also called external authentication
========================================================================
An alternative to BOSH prebinding is to generate temporary authentication
tokens which are then sent to the XMPP server and which it in turn checks
against some kind of external authentication provider (generally the same web-app that
generated the tokens).
In this case, you could use the :ref:`credentials_url` setting, to specify a
URL from which converse.js should fetch the username and token.
Option 3). Cryptographically signed tokens
==========================================
A third potential option is to generate cryptographically signed tokens (e.g.
HMAC tokens) which the XMPP server could authenticate by checking that they're
signed with the right key and that they conform to some kind of pre-arranged
format.
In this case, you would also use the :ref:`credentials_url` setting, to specify a
URL from which converse.js should fetch the username and token.