Ejabberd Installation and Operation Guide

Alexey Shchepin
mailto:alexey@sevcom.net
xmpp:aleksey@jabber.ru

July 31, 2005



Table of Contents

1  Introduction

ejabberd is a Free and Open Source fault-tolerant distributed Jabber server. It is written mostly in Erlang.

The main features of ejabberd are: The misfeatures of ejabberd are:

2  Installation from Source

2.1  Installation Requirements

2.1.1  Unix

To compile ejabberd, you will need the following packages:

2.1.2  Windows

To compile ejabberd in MS Windows environment, you will need the following packages:

2.2  Obtaining

Stable ejabberd release can be obtained at http://www.process-one.net/en/projects/ejabberd/download.html.

The latest alpha version can be retrieved from Subversion repository. 
  svn co svn://svn.process-one.net/opt/data/svn/ejabberd/trunk ejabberd

2.3  Compilation

2.3.1  Unix

  ./configure
  make
  su
  make install
This will install ejabberd to /var/lib/ejabberd directory, ejabberd.cfg to /etc/ejabberd directory and create /var/log/ejabberd directory for log files.

2.3.2  Windows

2.4  Starting

To start ejabberd, use the following command: 
  erl -pa /var/lib/ejabberd/ebin -name ejabberd -s ejabberd
or 
  erl -pa /var/lib/ejabberd/ebin -sname ejabberd -s ejabberd
In the latter case Erlang node will be identified using only first part of host name, i. e. other Erlang nodes outside this domain can't contact this node.

Note that when using above command ejabberd will search for config file in current directory and will use current directory for storing user database and logging.

To specify path to config file, log files and Mnesia database directory, you may use the following command: 
  erl -pa /var/lib/ejabberd/ebin \
      -sname ejabberd \
      -s ejabberd \
      -ejabberd config \"/etc/ejabberd/ejabberd.cfg\" \
                log_path \"/var/log/ejabberd/ejabberd.log\" \
      -sasl sasl_error_logger \{file,\"/var/log/ejabberd/sasl.log\"\} \
      -mnesia dir \"/var/lib/ejabberd/spool\"
You can find other useful options in Erlang manual page (erl -man erl).

To use more than 1024 connections, you should set environment variable ERL_MAX_PORTS: 
  export ERL_MAX_PORTS=32000
Note that with this value ejabberd will use more memory (approximately 6MB more).

To reduce memory usage, you may set environment variable ERL_FULLSWEEP_AFTER: 
  export ERL_FULLSWEEP_AFTER=0
But in this case ejabberd can start to work slower.

3  Configuration

3.1  Initial Configuration

The configuration file is initially loaded the first time ejabberd is executed, when it is parsed and stored in a database. Subsequently the configuration is loaded from the database and any commands in the configuration file are appended to the entries in the database. The configuration file consists of a sequence of Erlang terms. Parts of lines after `%' sign are ignored. Each term is tuple, where first element is name of option, and other are option values. E. g. if this file does not contain a ``host'' definition, then old value stored in the database will be used.

To override old values stored in the database the following lines can be added in config: 
  override_global.
  override_local.
  override_acls.
With this lines old global or local options or ACLs will be removed before adding new ones.

3.1.1  Host Names

Option hosts defines a list of Jabber domains that ejabberd serves. E. g. to serve example.org and example.com domains add the following line in the config: 
  {hosts, ["example.org", "example.com"]}.
Option host defines one Jabber domain that ejabberd serves. E. g. to serve only example.org domain add the following line in the config: 
  {host, "example.org"}.
It have the same effect as 
  {hosts, ["example.org"]}.

3.1.2  Default Language

Option language defines default language of ejabberd messages, sent to users. Default value is "en". In order to take effect there must be a translation file <language>.msg in ejabberd msgs directory. E. g. to use Russian as default language add the following line in the config: 
  {language, "ru"}.

3.1.3  Access Rules

Access control in ejabberd is performed via Access Control Lists (ACL). The declarations of ACL in config file have following syntax: 
  {acl, <aclname>, {<acltype>, ...}}.
<acltype> can be one of following:
all
Matches all JIDs. Example: 
{acl, all, all}.
{user, <username>}
Matches user with name <username> at the first virtual host. Example: 
{acl, admin, {user, "aleksey"}}.
{user, <username>, <server>}
Matches user with JID <username>@<server> and any resource. Example: 
{acl, admin, {user, "aleksey", "jabber.ru"}}.
{server, <server>}
Matches any JID from server <server>. Example: 
{acl, jabberorg, {server, "jabber.org"}}.
{user_regexp, <regexp>}
Matches local user with name that matches <regexp> at the first virtual host. Example: 
{acl, tests, {user, "^test[0-9]*$"}}.
{user_regexp, <regexp>, <server>}
Matches user with name that matches <regexp> and from server <server>. Example: 
{acl, tests, {user, "^test", "example.org"}}.
{server_regexp, <regexp>}
Matches any JID from server that matches <regexp>. Example: 
{acl, icq, {server, "^icq\\."}}.
{node_regexp, <user_regexp>, <server_regexp>}
Matches user with name that matches <user_regexp> and from server that matches <server_regexp>. Example: 
{acl, aleksey, {node_regexp, "^aleksey$", "^jabber.(ru|org)$"}}.
{user_glob, <glob>}
{user_glob, <glob>, <server>}
{server_glob, <glob>}
{node_glob, <user_glob>, <server_glob>}
This is same as above, but uses shell glob patterns instead of regexp. These patterns can have following special characters:
*
matches any string including the null string.
?
matches any single character.
[...]
matches any of the enclosed characters. Character ranges are specified by a pair of characters separated by a `-'. If the first character after `[' is a `!', then any character not enclosed is matched.
The following ACLs are pre-defined:
all
Matches all JIDs.
none
Matches none JIDs.
An entry allowing or denying access to different services would look similar to this: 
  {access, <accessname>, [{allow, <aclname>},
                          {deny, <aclname>},
                          ...
                         ]}.
When a JID is checked to have access to <accessname>, the server sequentially checks if this JID mathes one of the ACLs that are second elements in each tuple in list. If it is matched, then the first element of matched tuple is returned else ``deny'' is returned.

Example: 
  {access, configure, [{allow, admin}]}.
  {access, something, [{deny, badmans},
                       {allow, all}]}.
Following access rules pre-defined:
all
Always returns ``allow''
none
Always returns ``deny''

3.1.4  Shapers Configuration

With shapers is possible to bound connection traffic. The declarations of shapers in config file have following syntax: 
  {shaper, <shapername>, <kind>}.
Currently implemented only one kind of shaper: maxrate. It have following syntax: 
  {maxrate, <rate>}
where <rate> means maximum allowed incomig rate in bytes/second. E. g. to define shaper with name ``normal'' and maximum allowed rate 1000 bytes/s, add following line in config: 
  {shaper, normal, {maxrate, 1000}}.

3.1.5  Listened Sockets

Option listen defines list of listened sockets and what services runned on them. Each element of list is a tuple with following elements: Currently these modules are implemented:
ejabberd_c2s
This module serves C2S connections.

The following options are defined:
{access, <access rule>}
This option defines access of users to this C2S port. Default value is ``all''.
{shaper, <access rule>}
This option is like previous, but use shapers instead of ``allow'' and ``deny''. Default value is ``none''.
{ip, IPAddress}
This option specifies which network interface to listen on. For example {ip, {192, 168, 1, 1}}.
inet6
Set up the socket for IPv6.
starttls
This option specifies that STARTTLS extension is available on connections to this port. You should also set ``certfile'' option.
tls
This option specifies that traffic on this port will be encrypted using SSL immediately after connecting. You should also set ``certfile'' option.
ssl
This option specifies that traffic on this port will be encrypted using SSL. You should also set ``certfile'' option. It is recommended to use tls option instead.
{certfile, Path}
Path to a file containing the SSL certificate.
ejabberd_s2s_in
This module serves incoming S2S connections.
ejabberd_service
This module serves connections from Jabber services (i. e. that use the jabber:component:accept namespace).

The following additional options are defined for ejabberd_service (options access, shaper, ip, inet6 are still valid):
{host, Hostname, [HostOptions]}
This option defines hostname of connected service and allows to specify additional options, e. g. {password, Secret}.
{hosts, [Hostnames], [HostOptions]}
The same as above, but allows to specify several hostnames.
ejabberd_http
This module serves incoming HTTP connections.

The following options are defined:
http_poll
This option enables JEP-0025 (HTTP Polling) support. It is available then at http://server:port/http-poll/.

web_admin
This option enables web-based interface for ejabberd administration which is available at http://server:port/admin/, login and password should be equal to username and password of one of registered users who have permission defined in ``configure'' access rule.
For example, the following configuration defines that: 
  {acl, blocked, {user, "bad"}}.
  {access, c2s, [{deny, blocked},
                 {allow, all}]}.
  {shaper, normal, {maxrate, 1000}}.
  {access, c2s_shaper, [{none, admin},
                        {normal, all}]}.
  {listen,
   [{5222, ejabberd_c2s,     [{access, c2s}, {shaper, c2s_shaper}]},
    {5223, ejabberd_c2s,     [{access, c2s},
                              ssl, {certfile, "/path/to/ssl.pem"}]},
    {5269, ejabberd_s2s_in,  []},
    {5280, ejabberd_http,    [http_poll, web_admin]},
    {5233, ejabberd_service, [{host, "aim.example.org",
                               [{password, "aimsecret"}]}]},
    {5234, ejabberd_service, [{hosts, ["icq.example.org", "sms.example.org"],
                               [{password, "jitsecret"}]}]},
    {5235, ejabberd_service, [{host, "msn.example.org",
                               [{password, "msnsecret"}]}]},
    {5236, ejabberd_service, [{host, "yahoo.example.org",
                               [{password, "yahoosecret"}]}]},
    {5237, ejabberd_service, [{host, "gg.example.org",
                               [{password, "ggsecret"}]}]},
    {5238, ejabberd_service, [{host, "ile.example.org",
                               [{password, "ilesecret"}]}]}
   ]
  }.
Note, that for jabberd14- or wpjabberd-based services you have to make the transports log and do XDB by themselves: 
  <!--
     You have to add elogger and rlogger entries here when using ejabberd.
     In this case the transport will do the logging.
  -->

  <log id='logger'>
    <host/>
    <logtype/>
    <format>%d: [%t] (%h): %s</format>
    <file>/var/log/jabber/service.log</file>
  </log>

  <!--
     Some Jabber server implementations do not provide
     XDB services (for example jabberd 2.0 and ejabberd).
     xdb_file_so is loaded in to handle all XDB requests.
  -->

  <xdb id="xdb">
    <host/>
    <load>
      <!-- this is a lib of wpjabber or jabberd -->
      <xdb_file>/usr/lib/jabber/xdb_file.so</xdb_file>
      </load>
    <xdb_file xmlns="jabber:config:xdb_file">
      <spool><jabberd:cmdline flag='s'>/var/spool/jabber</jabberd:cmdline></spool>
    </xdb_file>
  </xdb>

3.1.6  Modules

Option modules defines the list of modules that will be loaded after ejabberd startup. Each list element is a tuple where first element is a name of a module and second is list of options to this module. See section A for detailed information on each module.

Example: 
  {modules,
   [{mod_register,  []},
    {mod_roster,    []},
    {mod_privacy,   []},
    {mod_configure, []},
    {mod_disco,     []},
    {mod_stats,     []},
    {mod_vcard,     []},
    {mod_offline,   []},
    {mod_announce,  [{access, announce}]},
    {mod_echo,      [{host, "echo.example.org"}]},
    {mod_private,   []},
    {mod_irc,       []},
    {mod_muc,       []},
    {mod_pubsub,    []},
    {mod_time,      [{iqdisc, no_queue}]},
    {mod_last,      []},
    {mod_version,   []}
   ]}.

3.1.7  Virtual Host Configuration

Options can be defined separately for different virtual hosts using host_config option. It have the have following syntax: 
  {host_config, <hostname>, [<option>, <option>, ...]}.
Example: 
{host_config, "example.org", [{auth_method, internal}]}.

{host_config, "example.com", [{auth_method, ldap},
                              {ldap_servers, ["localhost"]},
                              {ldap_uidattr, "uid"},
                              {ldap_rootdn, "dc=localdomain"},
                              {ldap_rootdn, "dc=example,dc=com"},
                              {ldap_password, ""}]}.

3.2  Online Configuration and Monitoring

3.2.1  Web-based Administration Interface

To perform online reconfiguration of ejabberd you need to enable ejabberd_http listener with option web_admin (see section 3.1.5). After that you can open URL http://server:port/admin/ with you favorite web-browser and enter username and password of an ejabberd user with administrator rights. E. g. with such config: 
  ...
  {host, "example.org"}.
  ...
  {listen,
   [...
    {5280, ejabberd_http, [web_admin]},
    ...
   ]
  }.
you should enter URL http://example.org:5280/admin/. After authentication you should see something like in figure 1.

Figure 1: Web-administration top page

Here you can edit access restrictions, manage users, create backup files, manage DB, enable/disable listened ports, and view statistics.

3.2.2  ejabberdctl tool

It is possible to do some administration operations using ejabberdctl command-line tool. You can check available options running this command without arguments: 
% ejabberdctl
Usage: ejabberdctl node command

Available commands:
  stop                          stop ejabberd
  restart                       restart ejabberd
  reopen-log                    reopen log file
  register user password        register a user
  unregister user               unregister a user
  backup file                   store a database backup in file
  restore file                  restore a database backup from file
  install-fallback file         install a database fallback from file
  dump file                     dump a database in a text file
  load file                     restore a database from a text file
  registered-users              list all registered users

Example:
  ejabberdctl ejabberd@host restart

4  Clustering

4.1  How it works

A Jabber domain is served by one or more ejabberd nodes. These nodes can be runned on different machines that are connected via a network. They all must have the ability to connect to port 4369 of all another nodes, and must have the same magic cookie (see Erlang/OTP documentation, in other words the file ~ejabberd/.erlang.cookie must be the same on all nodes). This is needed because all nodes exchange information about connected users, S2S connections, registered services, etc...

Each ejabberd node have following modules:

4.1.1  Router

This module is the main router of Jabber packets on each node. It routes them based on their destinations domains. It uses a global routing table. A domain of packet destination is searched in the routing table, and if it is found, then the packet is routed to appropriate process. If no, then it is sent to the S2S manager.

4.1.2  Local Router

This module routes packets which have a destination domain equal to this server name. If destination JID has a non-empty user part, then it is routed to the session manager, else it is processed depending on its content.

4.1.3  Session Manager

This module routes packets to local users. It searches to what user resource a packet must be sent via a presence table. Then packet is either routed to appropriate C2S process, or stored in offline storage, or bounced back.

4.1.4  S2S Manager

This module routes packets to other Jabber servers. First, it checks if an opened S2S connection from the domain of the packet source to the domain of packet destination is existing. If it is existing, then the S2S manager routes the packet to the process serving this connection, else a new connection is opened.

4.2  How to setup ejabberd cluster

Suppose you already setuped ejabberd on one of machines (first), and you need to setup another one to make ejabberd cluster. Then do following steps:
  1. Copy ~ejabberd/.erlang.cookie file from first to second.

    (alt) You can also add ``-cookie content_of_.erlang.cookie'' option to all ``erl'' commands below.

  2. On second run under `ejabberd' user in a directory where ejabberd will work later the following command: 
    erl -sname ejabberd \
    -mnesia extra_db_nodes "['ejabberd@first']" \
    -s mnesia
    This will start mnesia serving same DB as ejabberd@first. You can check this running ``mnesia:info().'' command. You should see a lot of remote tables and a line like the following: 
    running db nodes   = [ejabberd@first, ejabberd@second]
  3. Now run the following in the same ``erl'' session: 
    mnesia:change_table_copy_type(schema, node(), disc_copies).
    This will create local disc storage for DB.

    (alt) Change storage type of `scheme' table to ``RAM and disc copy'' on second node via web interface.

  4. Now you can add replicas of various tables to this node with ``mnesia:add_table_copy'' or ``mnesia:change_table_copy_type'' as above (just replace ``schema'' with another table name and ``disc_copies'' can be replaced with ``ram_copies'' or ``disc_only_copies'').

    What tables to replicate is very depend on your needs, you can get some hints from ``mnesia:info().'' command, by looking at size of tables and default storage type for each table on 'first'.

    Replicating of table makes lookup in this table faster on this node, but writing will be slower. And of course if machine with one of replicas is down, other replicas will be used.

    Also section 5.3 (Table Fragmentation) of Mnesia Reference Manual can be useful.

    (alt) Same as in previous item, but for other tables.

  5. Run ``init:stop().'' or just ``q().'' to exit from erlang shell. This probably can take some time if mnesia is not yet transfer and process all data it needed from first.

  6. Now run ejabberd on second with almost the same config as on first (you probably don't need to duplicate ``acl'' and ``access'' options --- they will be taken from first, and mod_muc and mod_irc should be enabled only on one machine in cluster).
You can repeat these steps for other machines supposed to serve this domain.

A  Built-in Modules

A.1  Common Options

The following options are used by many modules, so they are described in separate section.

A.1.1  iqdisc

Many modules define handlers for processing IQ queries of different namespaces to this server or to user (e. g. to example.org or to user@example.org). This option defines processing discipline of these queries. Possible values are:
no_queue
All queries of namespace with this processing discipline processed immediately. This also means that no other packets can be processed until finished this. Hence this discipline is not recommended if processing of query can take relatively long time.
one_queue
In this case created separate queue for processing of IQ queries of namespace with this discipline, and processing of this queue is done in parallel with processing of other packets. This discipline is most recommended.
parallel
In this case for all packets with this discipline spawned separate Erlang process, so all these packets processed in parallel. Although spawning of Erlang process have relatively low cost, this can broke server normal work, because Erlang emulator have limit on number of processes (32000 by default).
Example: 
  {modules,
   [
    ...
    {mod_time, [{iqdisc, no_queue}]},
    ...
   ]}.

A.1.2  host

This option explicitly defines hostname for the module which acts as a service.

Example: 
  {modules,
   [
    ...
    {mod_echo, [{host, "echo.example.org"}]},
    ...
   ]}.

A.1.3  hosts

This option explicitly defines a list of hostnames for the module which acts as a service.

Example: 
  {modules,
   [
    ...
    {mod_echo, [{hosts, ["echo.example.org", "echo.example.com"]}]},
    ...
   ]}.

A.2  mod_announce

This module adds support for broadcast announce messages and MOTD. When the module is loaded, it handles messages sent to the following JID's (suppose that main server has address example.org):
example.org/announce/all
Message is sent to all registered users at example.org. If the user is online and connected to several resources, only resource with the highest priority will receive the message. If the registered user is not connected, the message will be stored offline (if oflline storage is available).
example.org/announce/online
Message is sent to all connected users at example.org. If the user is online and connected to several resources, all resources will receive the message.
example.org/announce/all-hosts/online
Message is sent to all connected users at every virtual host. If the user is online and connected to several resources, all resources will receive the message.
example.org/announce/motd
Message is set as MOTD (Message of the Day) and is sent to users at example.org as they login. In addition the message is sent to all connected users (similar to announce/online resource).
example.org/announce/motd/update
Message is set as MOTD (Message of the Day) and is sent to users at example.org as they login. The message is not sent to all connected users.
example.org/announce/motd/delete
Any message sent to this JID removes existing MOTD.
Options:
access
Specifies who is allowed to send announce messages and set MOTD (default value is none).
Example: 
  % Only admins can send announcement messages:
  {access, announce, [{allow, admin}]}.

  {modules,
   [
    ...
    {mod_announce, [{access, announce}]},
    ...
   ]}.

A.3  mod_configure

Options:
iqdisc
ejabberd:config IQ queries processing discipline (see A.1.1).

A.4  mod_disco

This module adds support for JEP-0030 (Service Discovery).

Options:
iqdisc
http://jabber.org/protocol/disco#items and http://jabber.org/protocol/disco#info IQ queries processing discipline (see A.1.1).
extra_domains
List of domains that will be added to server items reply
Example: 
  {modules,
   [
    ...
    {mod_disco, [{extra_domains, ["jit.example.com",
                                  "etc.example.com"]}]},
    ...
   ]}.

A.5  mod_echo

This module acts as a service and simply returns to sender any Jabber packet. Module may be useful for debugging.

Options:
host
Defines hostname of the service (see A.1.2).
hosts
Defines hostnames of the service (see A.1.3). If neither host nor hosts are not present, then prefix echo. is added to all ejabberd hostnames.

A.6  mod_irc

This module implements IRC transport.

Options:
host
Defines hostname of the service (see A.1.2).
hosts
Defines hostnames of the service (see A.1.3). If neither host nor hosts are not present, then prefix irc. is added to all ejabberd hostnames.
access
Specifies who is allowed to use IRC transport (default value is all).
Example: 
  {modules,
   [
    ...
    {mod_irc, [{access, all}]},
    ...
   ]}.

A.7  mod_last

This module adds support for JEP-0012 (Last Activity)

Options:
iqdisc
jabber:iq:last IQ queries processing discipline (see A.1.1).

A.8  mod_muc

This module implements JEP-0045 (Multi-User Chat) service.

Options:
host
Defines hostname of the service (see A.1.2).
hosts
Defines hostnames of the service (see A.1.3). If neither host nor hosts are not present, then prefix conference. is added to all ejabberd hostnames.
access
Specifies who is allowed to use MUC service (default value is all).
access_create
Specifies who is allowed to create new rooms at MUC service (default value is all).
access_admin
Specifies who is allowed to administrate MUC service (default value is none, which means that only creator may administer her room).
Example: 
  % Define admin ACL
  {acl, admin, {user, "admin"}}

  % Define MUC admin access rule
  {access, muc_admin, [{allow, admin}]}

  {modules,
   [
    ...
    {mod_muc, [{access, all},
               {access_create, all},
               {access_admin, muc_admin}]},
    ...
   ]}.

A.9  mod_offline

This module implements offline message storage.

A.10  mod_privacy

This module implements Privacy Rules as defined in XMPP IM (see http://www.jabber.org/ietf/).

Options:
iqdisc
jabber:iq:privacy IQ queries processing discipline (see A.1.1).

A.11  mod_private

This module adds support of JEP-0049 (Private XML Storage).

Options:
iqdisc
jabber:iq:private IQ queries processing discipline (see A.1.1).

A.12  mod_pubsub

This module implements JEP-0060 (Publish-Subscribe Service).

Options:
host
Defines hostname of the service (see A.1.2).
hosts
Defines hostnames of the service (see A.1.3). If neither host nor hosts are not present, then prefix pubsub. is added to all ejabberd hostnames.
served_hosts
Specifies which hosts are served by the service. If absent then only main ejabberd host is served.
Example: 
  {modules,
   [
    ...
    {mod_pubsub, [{served_hosts, ["example.com",
                                  "example.org"]}]}
    ...
   ]}.

A.13  mod_register

This module adds support for JEP-0077 (In-Band Registration).

Options:
access
Specifies rule to restrict registration. If this rule returns ``deny'' on requested user name, then registration is not allowed for it. (default value is all, which means no restrictions).
iqdisc
jabber:iq:register IQ queries processing discipline (see A.1.1).
Example: 
  % Deny registration for users with too short name
  {acl, shortname, {user_glob, "?"}}.
  {acl, shortname, {user_glob, "??"}}.
  % Another variant: {acl, shortname, {user_regexp, "^..?$"}}.

  {access, register, [{deny, shortname},
                      {allow, all}]}.

  {modules,
   [
    ...
    {mod_register, [{access, register}]},
    ...
   ]}.

A.14  mod_roster

This module implements roster management.

Options:
iqdisc
jabber:iq:roster IQ queries processing discipline (see A.1.1).

A.15  mod_service_log

This module adds support for logging of user packets via any jabber service. These packets encapsulated in <route/> element and sended to specified services.

Options:
loggers
Specifies a list of services which will receive users packets.
Example: 
  {modules,
   [
    ...
    {mod_service_log, [{loggers, ["bandersnatch.example.com"]}]},
    ...
   ]}.

A.16  mod_shared_roster

This module implements shared roster groups support.

You can edit shared roster groups via web-interface. Each group has an unique ID and the following parameters:
Name
The name of the group, which will be displayed in roster.
Description
Textual description of this group, doesn't affect anything.
Members
List of full JIDs of group members, entered one per line in web-interface.
Displayed groups
List of IDs of groups which will be in rosters of this group members.
For example, to have a group of users which can see each other in roster, create a group like on table 1.
  Group `users'
Name Users
Members
user1@example.org
user2@example.org
user3@example.org
Displayed groups users

Table 1: Shared group example N1

To have 3 groups `managers', `workgroup1', and `workgroup2', where group `managers' can see members of all groups, and other two groups can see `managers' group and themselves, create groups like on table 2.
  Group `managers' Group `workgroup1' Group `workgroup2'
Name Managers Workgroup1 Workgroup2
Members
manager1@example.org
manager2@example.org
manager3@example.org
user1@example.org
user2@example.org
user3@example.org
user4@example.org
user5@example.org
user6@example.org
Displayed groups
managers
workgroup1
workgroup2
managers
workgroup1
managers
workgroup2

Table 2: Shared group example N2

A.17  mod_stats

This module adds support for JEP-0039 (Statistics Gathering).

Options:
iqdisc
http://jabber.org/protocol/stats IQ queries processing discipline (see A.1.1).

A.18  mod_time

This module answers UTC time on jabber:iq:time queries.

Options:
iqdisc
jabber:iq:time IQ queries processing discipline (see A.1.1).

A.19  mod_vcard

This module implements simple Jabber User Directory (based on user vCards) and answers server vCard on vcard-temp queries.

Options:
host
Defines hostname of the service (see A.1.2).
hosts
Defines hostnames of the service (see A.1.3). If neither host nor hosts are not present, then prefix vjud. is added to all ejabberd hostnames.
iqdisc
vcard-temp IQ queries processing discipline (see A.1.1).
search
Specifies whether search is enabled (value is true, default) or disabled (value is false) by the service. If search is set to false, option host is ignored and service does not appear in Jabber Discovery items.
matches
Limits the number of reported search results. If value is set to infinity then all search results are reported. Default value is 30.
allow_return_all
Specifies whether search with empty input fields can return all known users. Default is false.
search_all_hosts
If set in true then search returns matched items at all virtual hosts. Otherwise only current host items are returned. Default is true.
Example: 
  {modules,
   [
    ...
    {mod_vcard, [{search, true},
                 {matches, 20},
                 {allow_return_all, true},
                 {search_all_hosts, false}]}
    ...
   ]}.

A.20  mod_version

This module answers ejabberd version on jabber:iq:version queries.

Options:
iqdisc
jabber:iq:version IQ queries processing discipline (see A.1.1).

B  I18n/L10n

All built-in modules support xml:lang attribute inside IQ queries. E. g. on figure 2 showed the reply on the following query: 
  <iq id='5'
      to='example.org'
      type='get'
      xml:lang='ru'>
    <query xmlns='http://jabber.org/protocol/disco#items'/>
  </iq>

Figure 2: Discovery result when xml:lang='ru'

Also web-interface supports Accept-Language HTTP header (see figure 3, compare it with figure 1)

Figure 3: Web-administration top page with HTTP header ``Accept-Language: ru''

This document was translated from LATEX by HEVEA.